WWW.PROTONELLC.COM
  • Home
  • About us
  • Services
  • Photo
  • Blogs
  • Contact us

List of Services:


​

- Interior and Exterior Painting
- Drywall and Plaster Repair and Patching (Wet Sanding) 
- Wallpaper Installation & Removal
- Striped Wall Painting
- Wood Staining
- Kitchen Cabinets Painting
- Epoxy Coating 
- Special and Protective Coatings
- Deck Power Washing & Staining
- Carpentry Works
- Moldings Design with Installation:
Crown Moldings, Chair Rail, Box Moldings and more

Picture

Interior Painting

​
1. Setup
● Rooms and areas to be painted are scheduled with the customer.
● Large furniture is moved into the center of the room.
● Furniture is covered with plastic.
● Floors are covered with drop cloths.
 
2. Prep
● Walls are scuff-sanded.
● Holes and cracks in walls are spackled .
● Gaps in trim are caulked.
● Stains, such as water marks, are sealed.
●Washing is done where required.
●Wet Sending (Dust Free).
 
3. Painting
● Repaired areas are primed.
● Paint is applied by brush and roller.
● Ceiling and walls are painted to proper coverage and finish color.
● Clean cut lines between trim & walls.
● Only premium quality paints are used.
 
4. Clean-up
● Furniture is moved back to original Positions
● Floors and carpets are thoroughly vacuumed and swept.
● All trash is removed.
● Touch-up paint is left with the customer.




Exterior Painting
​

1. Pressure Washing
● Depending on the type of surface areas to be pressure washed each one can vary.
● With our expertise we will discuss the requirements of your project on site.
● Loose paint chips are cleaned up.
● House is given time to dry.
● Driveways & decks cleaned upon request.
 
2. Scraping, priming & minor maintenance
● All loose paint is removed, all bare areas are primed.
● Glossy areas are scuff-sanded.
● Feather-sanding and stripping done on request.
● Areas around doors and windows are caulked.                   
​● Wood, masonry and cement repairs available upon request or when specified.
 
3. Painting
● Full finish coat is applied to proper coverage & finish.
● All non-painted surfaces are covered to protect against splatter & drips.
● Paint is applied with a brush, roller, or sprayer depending on the surface.
● Amounts of coats required will be specified upon inspection.
● Only premium quality paints are used.
 
 4. Clean-up
● Performed daily and upon completion of the job.
● All trash is removed.
● Touch-up paint is left with the customer.



Picture
  • Home
  • About us
  • Services
  • Photo
  • Blogs
  • Contact us